Data wygenerowania zapytania ofertowego: 2026-11-19

ORLEN Petrobaltic S.A.

Stary Dwór 9

80-758 Gdańsk

NIP: 5830003042

Kupiec:

Anna Filipkowska

tel:

e-mail: anna.filipkowska@orlen.pl

ZAPYTANIE OFERTOWE NR Z650/400851

Tytuł zapytania

Treść zapytania:

Szanowni Państwo,

ORLEN Petrobaltic S. A. (zwana dalej „Zamawiającym”) z siedzibą w Gdańsku, przy ul. Stary Dwór 9, zaprasza Wykonawców/Dostawców do zapoznania się z zapytaniem ofertowym i do złożenia oferty.

Przedmiot zapytania:

1. Ball Valve NS 2’’ ASME B16.5 cl. 300 Full Bore with pneumatic actuator & limit switch -3 szt.

TAG No: 31-BDV-SPARE

Type: HIGH TEMPERATURE TRUNNION BALL VALVE

Size: 2"

Pressure rating / class: 300

End Connections: ASME B16.5, RF flanged

Op. Pressure: 16 - 17 bar

Design Pressure: 22 barg

Op. Temperature: 40 – 230 degC

Design Temperature: -10 degC + 260 degC

Fluid / process medium: natural gas

Mass density: 22.8 kg/m3

Design Code: API 6D

Fire Safe Design Code:API 607/ API 6FA / BS 6755 / BS 5146

Anti-Static,

Anti-Blow-Out

Body Material: ASTM A350 Gr. LF2 or A352 gr. LCC

Packing: ring, graphite

Bonnet: bolted, ASTM A350 Gr. LF2

Seat seal: graphite

Ball material: 316 SST hard faced (Tungsten Carbide)

Painting system: for offshore environment according to Painting Specification 113A20-PP-SP-10055, painting corrosivity category CX, durability category H, coating system for High Temperature service T > 205 deg C < 400 deg C

Hazardous area classification: Zone2, Group IIB, Class T4

Certification:

ATEX 2014/34/EU declaration of conformity

PED 2014/68/EU Declaration of conformity

Pneumatic Actuator:

Type: rotary

Action type: single acting, spring return

Body material: stainless steel orASTM A500 grade C

Power Failure Action: OPEN

Cylinder Design Pressure & Temperature: 12 barg /-10 + 120 degC

Actuator minimum torque values shall be 1.5 times the required valve torque at maximum operating conditions

Limit switch:

Switch type: magnetic, hermetic seal , dry contact, 2 wires, SPDT

Area clasiffication / certification: Flame proof / Explosion proof ATEX Exd, IIB or IIC, T4, IP 66

Body material: 316 SST

Cable entries: 2 x M20

Preferred: TopWorx TXS-L2CGNMM

Separate stainless steel TAG No. Plate to be provided and attached to each valve.

Required documents to be provided:

· Product Data Sheet for valve and actuator

· Cross sectional drawing with parts list for valve and actuator

· Operating Manual for valve and actuator

· Limit switch product data & ATEX certificate

· ATEX 2014/34/EU declaration of conformity for valve

· PED 2014/68/EU Declaration of conformity for valve

Referenced documents:

113A20-1104-IN-DS-20110_ 06_INSTR. DATA SHEETS - ONOFF VALVES (page 12)

2. Ball Valve NS 2’’ ASME B16.5 cl. 300 Full Bore -2 pcs.

TAG No:VB31-SPARE

Type: HIGH TEMPERATURE TRUNNION BALL VALVE

Size: 2"

Pressure rating / class: 300

End Connections: ASME B16.5, RF flanged

Op. Pressure: 16 - 17 bar

Design Pressure: 22 barg

Op. Temperature: 40 – 230 degC

Design Temperature: -10 degC + 260 degC

Fluid / process medium: natural gas

Mass density: 22.8 kg/m3

Design Code: API 6D

Fire Safe Design Code:API 607/ API 6FA / BS 6755 / BS 5146

Anti-Static,

Anti-Blow-Out

Body Material: ASTM A350 Gr. LF2 CL. 1 or A352 gr. LCC

Packing: ring, graphite

Bonnet: bolted, ASTM A350 Gr. LF2 CL. 1

Seat seal: graphite

Ball material: 316 SST hard faced (Tungsten Carbide)

Painting system: for offshore environment according to Painting Specification 113A20-PP-SP-10055, paintingcorrosivity category CX, durability category H, coating system for High Temperature service T > 205 deg C < 400 deg C

Hazardous area classification: Zone2, Group IIB, Class T4

Certification:

ATEX 2014/34/EU declaration of conformity

PED 2014/68/EU Declaration of conformity

Separate stainless steel TAG No. Plate to be provided and attached to each valve.

Required documents to be provided:

· Product Data Sheet

· Cross sectional drawing with parts list for valve

· Operating Manual for valve

· ATEX 2014/34/EU declaration of conformity for valve

· PED 2014/68/EU Declaration of conformity for valve

Referenced documents:

113A20-1104-IN-DS-20110_ 06_INSTR. DATA SHEETS - ONOFF VALVES

Kontrahent zostanie wyłoniony zgodnie z wewnętrzną procedurą Zamawiającego, w nieograniczonym procesie wyboru kontrahenta, a kryterium wyboru będzie:

a) Cena

b) Termin realizacji

d) Ocena techniczna oferty

W celu wyłonienia kontrahenta prosimy o złożenie oferty zgodnie z wytycznymi zawartymi
w niniejszym zaproszeniu do złożenia oferty.

Sposób złożenia oferty: poprzez platformę zakupową LOGINTRADE.

Termin rozpoczęcia składania oferty: 19.11.2026, godz. 11:00

Termin złożenia oferty: 30.11.2026, godz. 10.00.

Pytania należy zadawać wyłącznie przez Platformę Zakupową Logintrade do dnia 26.11.2026 do godz. 11:00. Na pytania zadane po terminie nie będą udzielane odpowiedzi.

ZAWARTOŚĆ OFERTY

Oferta powinna zawierać:

1. Ofertę zawierającą cenę jednostkową Produktu, uwzględniającą koszt transportu do siedziby Zamawiającego na warunkach DDP, ORLEN Petrobaltic S.A, ul. Stary Dwór 9, 80-758 Gdańsk, Incoterms 2020;

2. Warunki płatności – 30 dni od daty doręczenia prawidłowo wystawionej faktury;

3. Określenie terminu realizacji Zamówienia;

4. Warunki gwarancji na Produkty – na okres 24 miesięcy od daty dostarczenia całego Zamówienia;

5. Określenie kraju pochodzenia oferowanego Produktu – oferty producentów chińskich i rosyjskich nie będą brane pod uwagę;

6. Okres ważności oferty (wymagane minimum 30 dni);

ZASTRZEŻENIA ZAMAWIAJĄCEGO

1. Wykonawca zobowiązany jest zapoznać się z informacjami zawartymi w niniejszym zaproszeniu do złożenia oferty i przygotować ofertę zgodnie z wymaganiami określonymi w tym dokumencie.

2. Zamawiający nie będzie ponosić jakichkolwiek kosztów Wykonawcy związanych ze sporządzeniem oferty i udziałem wykonawcy w ewentualnych negocjacjach.

3. Zamawiający informuje, że wymagane jest złożenie oferty na pełny zakres zapytania ofertowego.

4. Zamawiający zastrzega sobie prawo odrzucenia oferty Wykonawcy bez podania przyczyny.

5. Zamawiający zastrzega sobie prawo do odwołania niniejszego zaproszenia do złożenia oferty bez podania przyczyny oraz możliwość przeprowadzenia negocjacji z wybranym Wykonawcą lub Wykonawcami do chwili podpisania umowy. Wybór Wykonawcy lub Wykonawców do dalszych negocjacji nie stanowi przyjęcia oferty ani rozstrzygnięcia przetargu w rozumieniu polskiego kodeksu cywilnego.

6. Zamawiający zastrzega, że wszystkie informacje przekazane w niniejszym zaproszeniu do złożenia oferty oraz wszelkie inne informacje i dokumenty jakie zostaną przekazane Wykonawcy w związku z przygotowaniem oferty stanowią prawnie chronioną tajemnicę przedsiębiorstwa Zamawiającego.

7. Zamawiający zastrzega sobie prawo, aż do upływu terminu składania Ofert, wprowadzenia zmian w Zapytaniu Ofertowym, o którym zobowiązany jest zawiadomić wszystkich Wykonawców.

8. Zamawiający informuje, że w przypadku opóźnienia w realizacji Zamówienia będzie uprawniony do żądania od Wykonawcy zapłaty kary umownej w wysokości 0,5% Wartości Przedmiotu Zamówienia za każdy rozpoczęty dzień opóźnienia.

9. Do zamówienia będą miały zastosowanie aktualnie obowiązujące w ORLEN Petrobaltic S.A. „Ogólne warunki zamówienia”, stanowiące załącznik do niniejszego zaproszenia.

Wszelkie uwagi do treści wspomnianego dokumentu można zgłaszać na etapie składania ofert.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

      Dear Sirs,

ORLEN Petrobaltic S.A. (hereinafter referred to as the "Employer/Buyer") with its registered office in Gdańsk, at Stary Dwor 9, invites Contractors/Suppliers to read the tender enquiry and to place an offer.

The subject of the inquiry:

1. Ball Valve NS 2’’ ASME B16.5 cl. 300 Full Bore with pneumatic actuator & limit switch -3 pcs.

TAG No: 31-BDV-SPARE

Type: HIGH TEMPERATURE TRUNNION BALL VALVE

Size: 2"

Pressure rating / class: 300

End Connections: ASME B16.5, RF flanged

Op. Pressure: 16 - 17 bar

Design Pressure: 22 barg

Op. Temperature: 40 – 230 degC

Design Temperature: -10 degC + 260 degC

Fluid / process medium: natural gas

Mass density: 22.8 kg/m3

Design Code: API 6D

Fire Safe Design Code:API 607/ API 6FA / BS 6755 / BS 5146

Anti-Static,

Anti-Blow-Out

Body Material: ASTM A350 Gr. LF2 or A352 gr. LCC

Packing: ring, graphite

Bonnet: bolted, ASTM A350 Gr. LF2

Seat seal: graphite

Ball material: 316 SST hard faced (Tungsten Carbide)

Painting system: for offshore environment according to Painting Specification 113A20-PP-SP-10055, painting corrosivity category CX, durability category H, coating system for High Temperature service T > 205 deg C < 400 deg C

Hazardous area classification: Zone2, Group IIB, Class T4

Certification:

ATEX 2014/34/EU declaration of conformity

PED 2014/68/EU Declaration of conformity

Pneumatic Actuator:

Type: rotary

Action type: single acting, spring return

Body material: stainless steel orASTM A500 grade C

Power Failure Action: OPEN

Cylinder Design Pressure & Temperature: 12 barg /-10 + 120 degC

Actuator minimum torque values shall be 1.5 times the required valve torque at maximum operating conditions

Limit switch:

Switch type: magnetic, hermetic seal , dry contact, 2 wires, SPDT

Area clasiffication / certification: Flame proof / Explosion proof ATEX Exd, IIB or IIC, T4, IP 66

Body material: 316 SST

Cable entries: 2 x M20

Preferred: TopWorx TXS-L2CGNMM

Separate stainless steel TAG No. Plate to be provided and attached to each valve.

Required documents to be provided:

· Product Data Sheet for valve and actuator

· Cross sectional drawing with parts list for valve and actuator

· Operating Manual for valve and actuator

· Limit switch product data & ATEX certificate

· ATEX 2014/34/EU declaration of conformity for valve

· PED 2014/68/EU Declaration of conformity for valve

Referenced documents:

113A20-1104-IN-DS-20110_ 06_INSTR. DATA SHEETS - ONOFF VALVES (page 12)

2. Ball Valve NS 2’’ ASME B16.5 cl. 300 Full Bore -2 pcs.

TAG No:VB31-SPARE

Type: HIGH TEMPERATURE TRUNNION BALL VALVE

Size: 2"

Pressure rating / class: 300

End Connections: ASME B16.5, RF flanged

Op. Pressure: 16 - 17 bar

Design Pressure: 22 barg

Op. Temperature: 40 – 230 degC

Design Temperature: -10 degC + 260 degC

Fluid / process medium: natural gas

Mass density: 22.8 kg/m3

Design Code: API 6D

Fire Safe Design Code:API 607/ API 6FA / BS 6755 / BS 5146

Anti-Static,

Anti-Blow-Out

Body Material: ASTM A350 Gr. LF2 CL. 1 or A352 gr. LCC

Packing: ring, graphite

Bonnet: bolted, ASTM A350 Gr. LF2 CL. 1

Seat seal: graphite

Ball material: 316 SST hard faced (Tungsten Carbide)

Painting system: for offshore environment according to Painting Specification 113A20-PP-SP-10055, paintingcorrosivity category CX, durability category H, coating system for High Temperature service T > 205 deg C < 400 deg C

Hazardous area classification: Zone2, Group IIB, Class T4

Certification:

ATEX 2014/34/EU declaration of conformity

PED 2014/68/EU Declaration of conformity

Separate stainless steel TAG No. Plate to be provided and attached to each valve.

Required documents to be provided:

· Product Data Sheet

· Cross sectional drawing with parts list for valve

· Operating Manual for valve

· ATEX 2014/34/EU declaration of conformity for valve

· PED 2014/68/EU Declaration of conformity for valve

Referenced documents:

113A20-1104-IN-DS-20110_ 06_INSTR. DATA SHEETS - ONOFF VALVES

Supplier will be selected according to the internal procedures of the Employer, in an open partner selection process and key selection criterion will be:

a) Price

b) Delivery time

c) Technical opinion

Start for submission of tender: November 19, 2026, 11:00 AM

Deadline for submission of tender: November 30, 2026, 10:00 AM

Questions should be asked only via the Logintrade Procurement Platform till November 26, 2026, 11.00 AM. Questions asked after the deadline will not be answered.

Formal criteria of the quotation:

1. Quotationwith unit net price of the Product,including delivery to ORLEN Petrobaltic S.A, ul. Stary Dwór 9, 80-758 Gdańsk, DDP Incoterms 2020;

2. Payment terms – net 30 days after invoice receipt;

3. Determination of contract completion date.

4. Warranty terms for Products - for a period of 24 months from the date of delivery of the entire Order;

5. Indication of the country of origin of the offered Product - offers from Chinese and Russian manufacturers will not be taken into consideration;

6. Offer validity (minimum 30 days required).

Reservations of the ordering party:

1. The Contractor is obliged to refer to the information contained in this invitation to tender and its annexes and prepare a tender in accordance to the requirements specified in this document.

2. The Employer shall not be liable for any costs of the Contractor concerning the preparation of the offer and attended by the Contractor in any negotiations.

3. The Employer informs that it is required to submit a tender for the full scope of the request for quotation.

4. The Employer reserves the right to reject the offer of the Contractor for any reason.

5. The Employer reserves the right to cancel this tender without giving any reason and the ability to conduct negotiations with the selected Contractor or Contractors till the time of signing the contract. The choice of the Contractor or Contractors for further negotiations does not constitute acceptance of the offer within meaning of the Polish Civil Code.

6. The Employer reserves, that all information provided in this invitation to tender and any other information and documents that will be submitted to the Contractor in connection with the preparation of the bid are legally protected business secret Employer.

7. The Employer reserves the right, until the deadline for submitting tenders, to make changes to the inquiry, about which it is obliged to notify all Suppliers.

8. The Employer informs that in case ofdelays in Order executionshall be entitled to demand payment of a contractual penalty from the Contractor in the amount of 0.5% of the Order Value for each and every commenced day of the delay.

9. The order shall be subject to the currently binding ORLEN Petrobaltic S.A. "General Conditions of Order" which constitute an appendix to this invitation.

Any comments to the content of this document can be made at the stage of submitting offers.

Produkty:

Lp. Nazwa produktu Ilość Jednostka Indeks Załącznik/Link Uwagi
1. ZAWÓR KULOWY NS 2" ASME +SIŁOWNIK PNEUM (zgodnie z załączonym opisem technicznym)//Ball Valve NS 2" ASME B16.5 cl. 300 Full Bore with pneumatic actuator & limit switch (as specified in the attached technical specification) 3 szt. Technicalspecificationforautomaticandmanualballvalves31-BDV.docx
2. ZAWÓR KULOWY NS 2" ASME B16.5 KL.300 (zgodnie z załączonym opisem technicznym)//Ball Valve NS 2" ASME B16.5 cl. 300 Full Bore (as specified in the attached technical specification) 2 szt. Technicalspecificationforautomaticandmanualballvalves31-BDV.docx

Dodatkowe warunki formalne:


Pytania do postępowania w ramach zapytania ofertowego "HIGH TEMPERATURE TRUNNION BALL VALVE /160061166/"

Lp. Tytuł pytania Data wysłania pytania Status
Brak wyników do wyświetlenia


Załączniki:


Waluta: PLN

Data i godzina rozpoczęcia przyjmowania ofert:

- - :

Data i godzina zakończenia przyjmowania ofert:

- - :

Data i godzina zakończenia zadawania pytań:

- - :

Uwaga:

1. Nasza firma wykorzystuje Platformę zakupową Logintrade jako narzędzie do kontaktów z dostawcami.

2. Oferty handlowe przyjmowane są tylko przez platformę zakupową.

3. Rejestracja w bazie dostawców naszej firmy, przeglądanie zapytań ofertowych oraz składanie ofert handlowych jest bezpłatne.

4. Jeśli nie posiadasz konta na platformie zakupowej Logintrade zarejestruj się w bazie dostawców w celu otrzymania loginu i hasła do swojego konta. Jedno konto dostawcy umożliwia otrzymywanie zapytań ofertowych od wielu kupców.

5. Aby przeglądać zapytania ofertowe od firmy, która je złożyła, musisz być zarejestrowany w jej bazie dostawców.

6. Regulamin Platformy zakupowej jest dostępny w panelu rejestracyjnym.